 | | | |
| Hand extruder | |
| - with Autoair supply for container engineering | |
| - with external air supply for container engineering | |
| - with Autoair supply for landfill construction |
| Welding shoes and weld geometries | |
| Accessories |
| Enquiry / Order | |
| - Brochure | |
| - Hand extruder | |
| - Welding shoes | |
| - Spare parts |
| Suitable MUNSCH transport cases are available for safe storage and transport of the hand extruders. |
| The welding rod dispenser accomodates two welding rod reels with a weight of up to 10 kg each; it can be rotated through 360º and is easy to remove for transport. |
| To produce test specimens up to a thickness of 6 mm. The test specimens are dimensioned to DVS 2225, Part 4. |
| To check the preheat air and extrudate temperatures; required by DVS-Standards 2207-4. Technical data: Sensor: NiCr-Ni Temperature range: -50 to +1150ºC Tolerance: ±1ºC Display: LCD 13 mm high Weight: about 200 g Temperature sensor: spring-mounted knife-edge probe, 1.5 mm in diameter, 130 mm long, made of V4A, plastic handle, 1000 mm silicon cable. Power supply: 9 V battery (included in scope of supply) |
| The weld trimmer removes weld projections without damage to the parent material. Technical data: Trimming width: 35 mm Trimming depth: max. 6 mm Drive rating: 900 W Weight: 3 kg |
| To produce oil-, water- and dust-free compressed air. An integrated vacuum control valve allows connection to low-pressure test bells. Technical data: Type: PICO Capacity: 26 m3/h Voltage: 230/400 V, 50 Hz, IP 55 Mains supply: 1.0 kW Pressure: max. low pressure 0.6 bar |